Electrical Engineer Resume Example with Skills

Electrical engineering employers read resumes for technical scope: the voltage levels, systems and standards you work with, the software you design in, and whether you hold or are working toward professional licensing. Results such as cost, safety and schedule still matter, and they are what separate strong candidates.

This example is written for a power and building systems engineer based in Canada with seven years of experience. The same structure works for controls, electronics or utility roles; change the technical detail to match your specialty.

Use This Example Browse Templates

Recommended resume format for an electrical engineer

Reverse-chronological, one to two pages. Engineers with several substantial projects can use two pages. Put your licensing status in the header or summary, and consider a short Selected Projects section when your job titles do not show the scale of your work. See the two-page resume guide.

Electrical engineer resume example

This example is fictional: the name, employers and numbers are invented to show structure and wording. It uses the Minimal template, one of the ATS-friendly designs. Replace every detail with your own, truthful information.

Preview of the electrical engineer example in the Minimal template.

Electrical Engineer resume text

Daniel Okafor, P.Eng.
Electrical Engineer
daniel.okafor@example.com | (555) 014-6621 | Mississauga, ON | linkedin.com/in/daniel-okafor-example

PROFESSIONAL SUMMARY
Licensed electrical engineer with 7 years of experience designing power distribution, lighting and fire alarm systems for commercial, healthcare and institutional buildings. Experienced in short-circuit and arc flash studies, code compliance under the Canadian Electrical Code and coordinating design with mechanical and architectural teams.

WORK EXPERIENCE
Electrical Engineer | Feb 2020 – Present
Maple Ridge Engineering Consultants | Toronto, ON
- Lead electrical designer for 11 commercial and healthcare projects with construction values from $4 million to $38 million.
- Designed 13.8 kV to 600 V distribution for a 220-bed hospital expansion, including emergency power and essential electrical systems.
- Completed short-circuit, coordination and arc flash studies in SKM PowerTools for 20 facilities, improving worker safety labeling and protective device settings.
- Reduced lighting power density by 28% below the energy code target on a college campus project through LED and controls design.

Engineer in Training | May 2017 – Jan 2020
Lakeshore Power Services | Hamilton, ON
- Prepared single-line diagrams, panel schedules and load calculations for industrial and municipal clients.
- Conducted site surveys and verified as-built conditions for 30 facility upgrades.
- Reviewed shop drawings and answered contractor requests for information during construction.

EDUCATION
Bachelor of Engineering in Electrical Engineering | Apr 2017
McMaster University | Hamilton, ON

SKILLS
Design: Power distribution, Emergency power, Lighting and controls, Fire alarm systems, Grounding and bonding
Studies: Load calculations, Short-circuit analysis, Protective device coordination, Arc flash (CSA Z462)
Software: AutoCAD, Revit MEP, SKM PowerTools, ETAP, AGi32

LICENSES
Professional Engineer (P.Eng.) | Jun 2021
Professional Engineers Ontario

Start from this example in the builder, then replace the details with your own. It opens as a new resume saved on your device.

Use This Example

Electrical engineer resume summary examples

State your discipline, your licensing status and the systems or sectors you know best. Engineering managers use the summary to decide whether your specialty matches their project pipeline.

Building systems engineerLicensed electrical engineer with 7 years of experience in power, lighting and life safety design for healthcare and institutional buildings. Skilled in coordination studies and code compliance.
Controls and automationElectrical controls engineer experienced in PLC programming, motor control design and commissioning for food and beverage plants. Cut unplanned downtime on two production lines by 18%.
Utility engineerUtility distribution engineer with 5 years of experience planning feeder upgrades, substation additions and distributed energy interconnections. Engineer in Training working toward licensure.
Graduate engineerElectrical engineering graduate with co-op experience in panel design and PLC troubleshooting. Designed a solar-powered monitoring station as a capstone project that placed second in the faculty showcase.

More ideas: resume summary examples.

Skills for an electrical engineer resume

Group skills by design area, analysis and software. Name specific codes and standards where they apply to your region, such as the National Electrical Code (NEC) in the United States or the Canadian Electrical Code in Canada.

Design areas

Power distribution
Motor control
Lighting design
Fire alarm
Low-voltage systems
Renewable energy

Analysis

Load flow
Short-circuit
Arc flash
Voltage drop
Harmonics
Protection coordination

Codes and standards

NEC (NFPA 70)
Canadian Electrical Code
NFPA 70E
IEEE 1584
CSA Z462

Software

AutoCAD Electrical
Revit
ETAP
SKM PowerTools
MATLAB
PLC software

See the resume skills guide for how to choose and present skills.

Electrical engineer experience bullet point examples

Engineering bullets are strongest when they include scale (voltage, size, budget), the standard or method used, and an outcome such as safety, efficiency, schedule or cost.

Designed a 2 MW rooftop solar interconnection, including protection settings approved by the local utility on first submission.
Programmed and commissioned PLC controls for 6 packaging lines, reducing changeover time by 22%.
Completed arc flash studies for 3 manufacturing plants and led training for 40 maintenance employees on the updated labels.
Resolved recurring breaker trips at a data center by identifying a harmonic issue and specifying filters.
Prepared construction documents and specifications for a $12 million school renovation delivered on schedule.
Mentored 2 co-op students on load calculations, drafting standards and site safety procedures.

Education section guidance

List your accredited engineering degree with the school and graduation year. Include your capstone project only if you graduated in the last few years or it is directly related to the role.

If you studied outside the country where you are applying, you can add a short note about credential assessment when relevant to licensing.

Certifications and licenses for an electrical engineer resume

Professional licensing is often the most important credential for electrical engineers. Show your current status clearly, whether licensed, Engineer in Training or working toward the exam.

Professional Engineer (PE in the United States, P.Eng. in Canada)
Engineer in Training (EIT) or Fundamentals of Engineering (FE) exam passed
LEED Green Associate or LEED AP
Certified Energy Manager (CEM)

Common electrical engineer resume mistakes

Listing every software package. Focus on the design and analysis tools you use regularly and that the employer mentions.
Unclear licensing status. Do not imply you are licensed if you are not. State EIT or "PE exam scheduled" accurately.
No sense of scale. "Designed electrical systems" could mean anything. Add voltage levels, building size, project value or number of sites.
Dense technical paragraphs. Keep bullets short and put the most important technical detail first.

ATS tips for an electrical engineer resume

Write standards both as abbreviations and in full where space allows, such as "National Electrical Code (NEC)".
Add your license under a clear heading such as Licenses or Certifications.
Avoid putting your license or credentials only after your name in a stylized header; repeat them in a section.
List software names exactly, such as "AutoCAD Electrical" or "ETAP".
Save your resume as a text-based PDF so symbols such as kV and MW remain readable.

Check your draft with the free ATS Resume Checker, which shows your resume completeness and the plain text an applicant tracking system reads.

Helpful resume guides

Electrical engineer resume FAQ

Should I put P.Eng. or PE after my name?

Yes, if you are licensed. Also list the license in a Licenses or Certifications section with the issuing body so automated systems and reviewers can confirm it.

How technical should an electrical engineer resume be?

Technical enough for an engineering manager to judge your scope, but clear enough for a recruiter. Lead each bullet with the result or the system, then add the technical detail.

Should I include a projects list?

A short Selected Projects section helps consultants and designers show project types and scale. Keep it to the most relevant four to six projects.

Do Canadian and US electrical engineer resumes differ?

The format is similar and photos are not expected in either country. Use the codes, standards and licensing terms of the country where you are applying.

Electrical Engineer Resume Example